View XTL1003-1_4860329.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.rfm.com e-mail: info@rfm.com page 1 of 6 ?2009-2010 by rf monolithics, inc. XTL1003-1 - 2/3/10

electrical characteristics characteristic sym notes minimum typical maximum units nominal frequency 13.56000 mhz mode of oscillation fundamental storage temperature range, crystal only -50 +125 c storage temperature range, in tape and reel -40 +85 c operating temperature range -20 +70 c frequency stability over operating temperature range 20 ppm (referred to the value at 25 c) frequency make tolerance f l 10 ppm @ 25 c 3 c equivalent series resistance esr 40 ? shunt capacitance c o 2.0 pf motional capacitance c m 4.2 20% ff nominal drive level 10 w load capacitance c l 13.5 pf insulation resistance at 100 vdc 500 m ? aging 1.0 ppm/year @ 25 c weight 0.037 0.005 g stanard shipping quantity on 330 mm (13?) reel 3000 units lid symbolization (in addition to lot and/or date codes) 1003-1 ywws sm5032-4 case caution: electrostatic sensitive device. observe precautions for handling. notes: 1. us and international patents may apply. 2. the design, manufacturing process, and specifications of this device are subject to change without notice. 3. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. XTL1003-1 13.56000 mhz crystal unit ? surface mount seam-weld package good frequency stability over temperature excellent reliability complies with directive 2002/95/ec (rohs) the XTL1003-1 is a surface mount 5.0 x 3.2 mm crystal unit for use in wireless telecommunications devices, especially where an ultra-miniature package is needed for mobility.
www.rfm.com e-mail: info@rfm.com page 2 of 6 ?2009-2010 by rf monolithics, inc. XTL1003-1 - 2/3/10 dot indicates pin 4 1 . 2 0 . 1 2.2 0.1 1 . 2 0 . 1 1.7 0.1

electrical connections pin connection 1cosc 2 gnd (lid) 3fskout 4 gnd (lid) 4-terminal surface-mount seam weld case 5.0 x 3.2 mm nominal footprint sm5032-4 case footprint (mm) package orientation in carrier tape pin 3
www.rfm.com e-mail: info@rfm.com page 3 of 6 ?2009-2010 by rf monolithics, inc. XTL1003-1 - 2/3/10 reel dimensions tape dimensions notes: 1. unless otherwise specified, tolerance on dimensions is 0.1 mm 2. material is black conductive polystyrene 3. 10 pitch cumulative tolerance is 0.2 mm
www.rfm.com e-mail: info@rfm.com page 4 of 6 ?2009-2010 by rf monolithics, inc. XTL1003-1 - 2/3/10 typical reflow profile ! ! ! " # "
$ %
&
' ( )
*
$ & notes: 1. maximum peak temperature: 265 degrees c for 8 to 12 seconds 2. typical reflow temperature: 217 5 degrees c for 90 to 100 seconds
www.rfm.com e-mail: info@rfm.com page 5 of 6 ?2009-2010 by rf monolithics, inc. XTL1003-1 - 2/3/10 packing - 3,000 units per reel maximum
www.rfm.com e-mail: info@rfm.com page 6 of 6 ?2009-2010 by rf monolithics, inc. XTL1003-1 - 2/3/10 reliability specifications reference standard resistance to temp./ duration : 260 c /10 seconds 2 times eiajed-4701 soldering heat total time : 4 minutes (ir-reflow) (ir reflow) -300(301)m(ii) vibration total peak amplitude: 1.5 mm mil-std 202f vibration frequency: 10 to 55 hz method 201a sweep period: 1.0 minute vibration directions: 3 mutually perpendicular duration: 2 hours per direction mechanical directions: 3 impacts per axis mil-std 202f shock acceleration: 3000g's, + 20/-0 % method 213c duration: 0.3 ms (total 18 shocks) waveform : half-s ine solderability solder temperature: 265 5c mil-std 883g duration time: 5 0.5 seconds. method 2003 thermal shock heat cycle conditions mil-std 883g -55 c, 30 minutes <> 125 c, 30 minutes method 1010.7 * cycle time : 10 times humidity test temperature: 70 2 c mil-std 202f relative humidity: 90~95% method 103b duration: 96 hours dry heat temperature: 125 2 c mil-std 883g ( aging test ) duration: 168 hours method 1008.2 condition c pct test pres s ure: 2.06 kg/cm 2 (2.03*10 5 pa) eiajed-4701-3 temperature : 121 2 c b-123a relative humidity : 100% duration: 24 hours environmental characteristics mechanical characteristics test name test process / method

▲Up To Search▲

Price & Availability of XTL1003-1

	To Download XTL1003-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .